Gain a
Second Analog System Extension
The RSGM has one
analog CO port and one SLT connection that when
enabled, provides for the use of a second analog
device at the remote site. This feature is useful
for applications such as Faxing, Credit Card
validations, or even a second extension of the phone
system.
Network
Failover
When the network
connection to a standalone TeleniumIP phone is lost,
the RSGM can automatically route outbound calls from
the IP phone to the PSTN (Public Switched Telephone
Network).
Power
Loss Contingency
In a power loss
situation, the IP phone is no longer functional.
When an RSGM is in place, an analog phone connected
to the RSGM will still work via the PSTN.
Need a
Router?
The RSGM can also act
as a DHCP server at the remote site for managing
network traffic. It can assign private IP addresses
to internal clients such as personal computers for
simplified network administration and increased
security.
Flexibility for Messages On Hold
A message-on-hold
port on the RSGM allows remote users to play their
own Messages On Hold for their callers placed on
hold. This can reduce load on the IP network if
needed.
Support
for Alarms and Doorbells, and Gate Openers
The RSGM has two dry
relay contacts to support these communications
functions at the remote site.
LAN
Power for the TeleniumIP
Phone
The RSGM eliminates
the need for a separate power supply for the
TeleniumIP phone, as power is supplied through the
Ethernet port on the RSGM.
The RSGM
provides the following hardware resources:
-
One WAN Connection
(RJ-45: 10/100 Ethernet port) - Auto MDI/MDIX
Switching
-
One PC Connection
Port (RJ-45 : 10/100 Ethernet port)
-
One IP Phone
Connnection Port (RJ-45: 10/100 Ethernet port) -
Power Over Ethernet
-
One analog CO Line
(RJ-11)
-
One analog SLT port
-
One Alarm/Doorbell
contact
-
Two dry relay
contacts
-
One local message on
Hold Port
-
One RS232 connector
for management
 | 
